우분투 서버 초기 설정

1. 고정IP 설정

sudo vi /etc/network/interfaces ---------------------------------------------------------------------------------- # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 192.168.0.71 gateway 192.168.0.1 netmask 255.255.255.0 dns-nameservers 168.126.63.1 168.126.63.2 ---------------------------------------------------------------------------------- 아래 실행하여 변경 내용 반영 sudo /etc/init.d/networking restart 2. SSH설정 sudo apt-get install openssh-server sudo /etc/init.d/ssh restart sudo vi /etc/hosts.allow

----------------------------------------------------------------------------------
#                   See the manual pages hosts_access(5) and hosts_options(5).
#
# Example:    ALL: LOCAL @some_netgroup
#             ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
#
# If you're going to protect the portmapper use the name "portmap" for the
# daemon name. Remember that you can only use the keyword "ALL" and IP
# addresses (NOT host or domain names) for the portmapper, as well as for
# rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8)
# for further information.
#
sshd 192.168.0.2

----------------------------------------------------------------------------------

3. ssh툴에서 언어 UTF-8로 변경


4. sudo apt-get install mysql-server

5. sudo vi /etc/mysql/my.cnf
bind address 찾아 주석 처리

6. FTP설정
sudo apt-get install vsftp

필요한 옵션 편집
sudo vi /etc/vsftpd.conf
local_eable=YES

서비스 재시작
sudo /etc/init.d/vsftpd restart